Skip to main content

Too much red tape, not sure where to start? Call Mitch directly at 021502429, let's make it happen together!

Rural drainage, culverts and river protection in Nelson, Tasman and Marlborough

Culverts, farm drainage and rock bank protection, sized to the rules and built to last the next big rain.

Rural drainage contractor for Nelson, Tasman and Marlborough

Aspect Contracting and Forestry installs culverts, farm drainage and rock bank protection across Nelson, Tasman and Marlborough. We size culverts to council and fish-passage rules, build drainage to the agreed design and protect flood-damaged banks with quarry rock. Send Mitch a photo of the crossing, drain or bank and we will talk it through.

Drainage and culvert work

Aspect carries out:

  • Entranceway and farm-crossing culverts, new or replacement.

  • Drain cleaning, reshaping and paddock drainage.

  • Culvert crossings for tracks on lifestyle and forestry blocks.

  • Rock protection for eroded and flood-damaged banks. See river protection.

  • Stormwater outfalls, swales and scour protection for developers, to TDC standards.

  • Drainage for vineyards and orchards on heavy soils.

Related services: Driveways and farm tracks · Fire ponds and farm dams · Gravel cartage and on-site crushing

From site visit to finished drain

1

Site visit

We walk the drain, crossing or bank and look at the catchment above it.

2

Size and rules

We size the culvert to the catchment and fish-passage rules and check whether consent is needed.

3

Timing

Instream work is planned for late summer to early autumn, outside spawning windows.

4

Build

Excavate, bed and lay pipe, compact backfill in layers and armour the inlet and outlet. Who supplies the pipe is agreed in the quote.

5

Handover

We walk the finished work with you and confirm any records needed for our part of the job.

Rules that apply to drainage and culverts

  • Minimum culvert size: In Tasman, at least 375 mm diameter under a rural entranceway or road crossing, larger depending on the catchment (TDC Engineering Standards, Chapter 6).

  • Fish passage: A permitted new culvert under the NES-Freshwater must span 1.3 times bankfull width on streams up to 3 m wide, and be open-bottomed or set at least 25 per cent of its diameter below bed level (NES-F fish passage note).

  • Seasonal limits in Tasman: TRMP Chapter 28 bars motorised machinery in Schedule 30A trout-spawning rivers from 1 May to 30 September, and bed disturbance within 1 km of a river mouth from 15 February to 31 May (TRMP Chapter 28).

  • Rock only: In Tasman, scour protection must be rock or natural substrate with geotextile; demolition material, waste fill and vehicle bodies are banned (TRMP Chapter 28).

  • Marlborough gravel: River gravel is taken under MDC's permit system inside Floodway Zones; outside them a resource consent is required (MDC).

Rules and thresholds change; we confirm the current position with your council before we quote.

Drainage we built on two Tasman projects

On a wind-damage salvage job in a Tasman forest, Aspect upgraded and drained more than 15,000 lineal metres of road and installed more than 100 culverts so harvest crews could get the timber out. On a rural driveway and house site, also in Tasman, we built three culvert crossings into the new driveway.

These figures describe those projects, not a standard specification or timeframe for another job.

100+

Drainage culverts

Installed across the salvage road network.

15,000+ m

Road upgrade and drainage

3

Culvert crossings

Built into a new rural driveway.

Rural drainage FAQs

Common questions from farmers and rural landowners. Still unsure? Call Mitch on 021 502 429.

What size culvert do I need for a farm crossing in Tasman?

At least 375 mm under a rural entranceway or road crossing, Tasman District Council's minimum (TDC Chapter 6). Beyond that, size follows the catchment: roughly 375–525 mm for 10 ha and 525–675 mm for 20 ha, more where runoff is high (MfE). We size each crossing for its catchment.

Do I need consent to install or replace a culvert?

Often not, if you meet the permitted rules: the right span, invert buried at least 25 per cent, no impediment to flood flow or fish, and work outside closed seasons. Permitted riverbed structures in Tasman are limited to 2 m² of horizontal area (TRMP Chapter 28). Replacing a pre-2020 culvert brings it under the new rules (MfE).

Can I lay two smaller culverts instead of one big one?

Not to meet the span rule. Under the NES-Freshwater, parallel culverts do not add up: two 1,200 mm pipes side by side count as a 1,200 mm span, not 2,400 mm (NES-F guidance note). On forestry roads, double culverts are limited to flows under 7.5 m³/s (NES-CF summary).

How much does a culvert or drainage job cost?

Price depends on pipe diameter and length, the rock needed at the inlet and outlet, machine and truck access, whether consent is needed, and ground conditions. We price everything from a single entranceway culvert to a farm-wide drainage plan. Send photos and the catchment above the crossing for a ballpark; a site visit gives a fixed quote.

How long does a culvert installation take?

A rural entranceway culvert is a short job once pipe and rock are on site; bank protection runs longer because of rock cartage. Small jobs are usually fitted in around larger ones. Timing is what stretches the programme: TDC advises planning instream work for the driest period, late summer to early autumn (TDC Waterway Crossings guidelines).

How do I stop river bank erosion on my farm?

Usually with rock. The bank is reshaped to a stable batter, lined with geotextile and armoured with graded quarry rock, typically 200–400 mm rip-rap, keyed into the toe. In Tasman, the TRMP only allows rock or natural substrate for scour protection (TRMP Chapter 28). Work in the riverbed needs a consent check first.

Do you do flood repairs in the Motueka Valley?

Yes. The 2025 floods damaged $23–25 million of river infrastructure across the Dove, Motupiko, Tadmor, Motueka and Wai-iti rivers (RNZ), and TDC's river recovery programme covers public rock repairs and channel shaping (TDC). We take on private bank, culvert and track repairs from Tapawera to Riwaka when conditions allow.

What clients say

Request a quote

Send us photos of the crossing, drain or bank and the location. We work across Nelson, Tasman, Motueka and the Motueka Valley, Golden Bay/Tākaka, Marlborough and Blenheim, plus St Arnaud, Murchison, Picton and the Sounds. We take a look at anything.

Call Mitch: 021 502 429

Email: info@aspecthub.co.nz

Aspect Contracting and Forestry, 65 Whitby Road, Wakefield

Emergency enquiries: call Mitch at any time; routine enquiries answered within 48 hours.

This site is protected by reCAPTCHA and the Google
Privacy Policy and Terms of Service apply.

Message Sent