Bulk earthworks, access roads and site clearance in Nelson, Tasman and Marlborough
Large cut and fill, land development and access-road earthworks, with GPS machine control and one point of contact.
Bulk earthworks and earthmoving contractors
Aspect Contracting and Forestry carries out bulk cut and fill, land development and access-road earthworks across Nelson, Tasman, Golden Bay/Tākaka and Marlborough, including Blenheim. We agree the ground information, design, drainage, testing and programme with your project team before work starts.
Bulk earthworks and land development
Aspect carries out:
Site cuts for developers, from a few hundred cubic metres upwards.
Engineered fill platforms for commercial builders, placed and compacted to the engineer's specification under NZS 4431:2022.
Rural access roads and site clearance.
Land development stages and subdivision earthworks.
GPS machine-controlled earthworks working from the design model.
Gravel cartage and on-site crushing for road metal.
Vineyard and lifestyle block earthworks around Blenheim and Renwick.
Related services: Subdivision earthworks · Gravel cartage and on-site crushing · GPS machine-controlled earthworks
From site visit to compacted fill
1
Site visit
We measure cut, fill and what must leave site, and check access.
2
Agree the scope
Drawings, ground information, consent requirements and programme are confirmed with your team.
3
Strip and cut
The bulldozer pushes and spreads to the GPS model, the excavator loads trucks, and topsoil is stockpiled for reuse.
4
Fill and compact
Fill goes down in layers with roller compaction, to your engineer's specification where fill is engineered.
5
Trim and handover
Final trim, drainage and stabilisation, with the records for our part of the work agreed up front.
Rules and thresholds change; we confirm the current position with your council before we quote.
See our projects
Subdivisions, a dam spillway, a house site and forestry roading across Tasman, with what Aspect did on each job and the figures behind it.
Bulk earthworks FAQs
Common questions from developers, builders and landowners planning a large cut. Still unsure? Call Mitch on 021 502 429.
Do I need consent for bulk earthworks?
Volume, area, slope and setbacks under the Tasman Resource Management Plan and the Nelson Plan decide whether a cut needs consent, and thresholds vary by zone. In Nelson and Tasman, no batter may be steeper than 1V:1.5H without the Engineering Manager's approval (NTLDM 2022). Nelson City requires an Erosion and Sedimentation Control Plan once disturbed land exceeds 0.3 ha (NCC LDM Section 9).
How much does bulk earthworks cost per m³ in NZ?
Price depends on volume, ground (rock costs more than clay), haul distance, tip fees, slope and whether fill must be certified. We price everything from a few hundred cubic metres to a 40,000 m³ stage. Call with rough volumes or send photos for a ballpark; a fixed quote is priced from a site survey and the engineer's drawings.
What is engineered fill and does it need certifying?
Engineered fill is material compacted in layers to a written specification so a building can sit on it. NZS 4431:2022 sets out the investigation, design, construction, testing and certification for fill under lightweight buildings (Codehub). Your geotechnical engineer certifies it; we place and compact the fill to their specification.
How long does a bulk earthworks job take?
It depends on volume, haul distance and how much leaves site. For scale, the earthworks at Ruby Bay Views, a 14-lot subdivision in Tasman, involved about 40,000 m³ of cut to fill and topsoil over roughly five months. Small jobs are usually fitted in around larger ones. Drier seasons suit big cuts, although winter work can be possible in suitable soils.
Do you do bulk earthworks in Marlborough?
Yes. We work from Wakefield across to Blenheim, Renwick, the Wairau Valley, Picton and the Marlborough Sounds. Marlborough's rules differ: on rural land steeper than 20°, the Marlborough Environment Plan caps permitted excavation at 1,000 m³ per 24 months and requires an 8 m setback from rivers (MEP Chapter 3).
What pavement build does a new access road need in Tasman?
Tasman's engineering standard puts the top 150 mm of pavement in M4 AP40 basecourse over a sub-basecourse layer, with culverts under rural crossings of at least 375 mm diameter (TDC Engineering Standards Chapter 6). We crush and cart the metal ourselves, so one contractor is responsible for the whole road.
What clients say
Request a quote
Send us the drawings, or a site address and rough volumes. We take a look at anything.
Call Mitch: 021 502 429
Email: info@aspecthub.co.nz
Aspect Contracting and Forestry, 65 Whitby Road, Wakefield








