House pads, shed pads and site preparation in Nelson, Tasman and Marlborough
Building platforms for builders, shed companies and rural landowners, trimmed to level with GPS machine control.
Site preparation and house pads, ready for your builder
Aspect Contracting and Forestry prepares building sites across Nelson, Tasman and Marlborough from our Wakefield base. We cut house and shed pads, shape sloping sections, and place engineered fill compacted to your engineer's specification under NZS 4431. We strip, cut, fill, compact and drain so the platform is ready for the foundation crew.
House pad and site preparation work
Aspect carries out:
House platforms for new homes, including cut and fill on sloping sections in Richmond, Stoke, Brightwater and Motueka.
Farm, commercial and lifestyle shed pads, including work for shed companies.
Engineered fill placed in layers and compacted to your engineer's specification.
Subsoil drains and stormwater for the platform.
Rural build packages around Wakefield, Tapawera and Upper Moutere: house pad, driveway and fire pond in one mobilisation.
Excavation, footing preparation, drainage and backfill for retaining walls, with builders constructing the wall.
Lot platforms as part of subdivision earthworks.
We take a look at anything, from a single shed pad to a house site with thousands of cubic metres of cut to fill.
Related services: Subdivision earthworks · Driveways and farm tracks · Fire ponds and dams · Retaining walls
From site walk to finished platform
1
Site walk and drawings
We read the geotechnical report, foundation plan and consent conditions, and check the site against council rules.
2
Sediment control and strip
Silt fence and stabilised entrance in, topsoil stripped and stockpiled.
3
Cut and fill to the model
The design is loaded into GPS machine control on our bulldozer and excavator.
4
Engineered fill
Fill is placed in layers, moisture-conditioned and rolled to the specification your engineer sets.
5
Trim and drain
Final trim, subsoil drains and stormwater, ready for the foundation crew.
Your engineer sets the fill specification and testing regime, and a certifier signs the fill off. Rules and thresholds change; we confirm the current position with your council before we quote.
Driveway and house site, Tasman: clearing and cutting a house site
Aspect cleared a pine-covered rural block in Tasman, cut the house site and formed the driveway with three culvert crossings so the owners could build. The job involved around 4,500 m³ of cut-to-fill and the removal of more than 100 pine trees. These figures describe that project.
4,500 m³
Cut to fill
100+
Pine trees removed
3
Culvert crossings
Site preparation FAQs
Common questions from builders and homeowners preparing a site. Still unsure? Call Mitch on 021 502 429.
What is engineered fill and when do I need it?
Engineered fill is fill placed, compacted and tested to a written specification so it can carry a building. Any house or shed on filled ground needs it, and the governing standard is NZS 4431:2022 (Building CodeHub). Uncontrolled fill cannot be certified and can force a more expensive foundation design.
What compaction does a house or shed pad need in Nelson and Tasman?
The Nelson Tasman Land Development Manual asks for moisture within 2% of optimum, at least 95% of maximum dry density for clays and gravels, 100% for sands, and one density test per metre of fill on a 30 m grid. Fill of 100 m² or less and 600 mm or less deep can be exempt (NTLDM). We compact to your engineer's specification.
Who certifies engineered fill for a building consent?
NZS 4431:2022 names two roles: a geotechnical designer who writes the specification, and a certifier who confirms the fill meets it. On small jobs one engineer often does both (Building CodeHub). We place and compact the fill to their specification, and the certificate goes to council with the building consent file.
How much does site preparation cost for a new build?
Price depends on cut and fill volume, slope, rock, cartage and imported fill. We price everything from a single shed pad to a multi-lot stage. Photos and the foundation plan get you a ballpark; a fixed price comes from the drawings, the geotechnical report and a site visit.
Do I need consent to level a house site?
It depends on the council. In Nelson's residential zone, cut or fill up to 1.2 m is permitted (Nelson City Council). In rural Tasman, cuts of 1 m or less over 1 ha or less a year are permitted (TRMP Rule 18.5). In rural Marlborough, excavation on slopes steeper than 20° is limited to 1,000 m³ in any 24 months (Marlborough Environment Plan). The building consent covers the pad itself.
How long does it take to prepare a house pad?
It depends on slope, fill depth and testing. A flat pad is a short job. A sloping cut-and-fill platform takes longer because each layer of engineered fill is rolled and tested before the next goes on. Moisture must stay within 2% of optimum, so wet weather can pause fill placement.
When is the best time of year for site works?
Drier seasons are generally best for fill placement, although winter work can be possible in suitable soils and conditions. Nelson's rules require disturbed ground on 5–20% slopes to be stabilised within 14 days, with seeding windows of 1 February to 15 May and 15 August to 30 November (Nelson LDM, Section 9). Summer slots fill from spring, so book early.
Can you do the house pad, driveway and fire pond together on a rural block?
Yes, and it is an efficient way to build around Wakefield, Motueka or Tapawera. One mobilisation can cover the platform, the driveway, firefighting water where the rules require it, and septic and stormwater trenches. Pad cut can become driveway fill. The vehicle crossing at the road needs its own council permit, and we can talk you through the process.
What clients say
Request a quote
Send us the foundation plan, geotechnical report and address, or call Mitch to talk through the site.
Call Mitch: 021 502 429
Email: info@aspecthub.co.nz
Aspect Contracting and Forestry, 65 Whitby Road, Wakefield








