Skip to main content

Too much red tape, not sure where to start? Call Mitch directly at 021502429, let's make it happen together!

Land clearing, mulching and firebreaks in Nelson, Tasman and Marlborough

Gorse, scrub, pines and shelterbelts cleared, firebreaks formed and ex-forestry blocks returned to pasture.

Land and scrub clearing contractors

Aspect Contracting and Forestry clears gorse, broom, scrub, pines and shelterbelts across Nelson, Tasman, Golden Bay/Tākaka and Marlborough, including Blenheim. We mulch scrub standing by excavator and mulcher, windrow slash with the bulldozer and blade firebreaks. Clearing done properly is the first stage of a fire-safe, productive block.

Land clearing and firebreak work

Aspect carries out:

  • Gorse, broom and scrub clearing on lifestyle blocks and farms.

  • Defensible space and firebreaks for rural homes on pine or kānuka edges, with fire-truck access.

  • Ex-forestry cutover back to pasture: stumps, slash, root raking and contouring, as part of forest conversion.

  • Vegetation clearance and root raking, with stumps, residues and the finished ground agreed before we start.

  • Flood debris and willow cleared from paddocks around Riwaka and the Motueka River.

  • Tree felling and shelterbelt removal, with subcontracted harvesting crews we manage for larger trees.

  • Follow-on farm tracks, fire ponds and rural maintenance.

Related services: Forest conversion · Rural maintenance · Driveways and farm tracks · Fire ponds and farm dams · Tree felling and shelterbelt removal

From walkover to cleared ground

1

Site walk

We look at slope, streams, native and exotic vegetation, and the result you want.

2

Rules check

We check stream setbacks, indigenous vegetation rules and council thresholds, and tell you whether consent is needed.

3

Clear

The mulcher grinds gorse and scrub standing; the bulldozer windrows slash and blades firebreaks.

4

Arisings

Mulch stays as ground cover, windrows are burnt in an open season with a permit, or material is carted away.

5

Finish

We contour and track the block, then talk through follow-up spraying or grazing.

In Nelson City, an Erosion and Sedimentation Control Plan is required once disturbed land exceeds 0.3 ha (NCC Land Development Manual, Section 9). In Marlborough, the Marlborough Environment Plan does not permit blading or root raking on land steeper than 20° or within 8 m of a river (MEP Chapter 3). Rules and thresholds change; we confirm the current position with your council before we quote.

On one Tasman driveway and house site, the job included removing more than 100 pine trees.

See our projects

Subdivisions, a dam spillway, a house site and forestry roading across Tasman, with what Aspect did on each job and the figures behind it.

Land clearing FAQs

Common questions from rural landowners planning a clear-out. Still unsure? Call Mitch on 021 502 429.

How big should a defensible space be around my rural house?

FENZ puts zone one at 10 m on all sides of the house, kept as lawn or low fire-resistant planting. Zone two runs from 10 to 30 m: scrub removed, trees spaced so canopies do not touch and branches pruned to 2 m above ground (FENZ).

Can FENZ require me to put in a firebreak?

Yes. Under section 62 of the Fire and Emergency New Zealand Act 2017, FENZ can require a landholder to make and clear a firebreak (FENZ Firebreaks Policy factsheet). FENZ also asks for driveways at least 4 m wide and 4 m high so fire trucks can reach the house (FENZ). We can blade the firebreak and clear the access in one job.

Do I need consent to clear gorse or scrub in Tasman?

Usually not for gorse and other exotics on easy ground, but the setbacks matter. TRMP Chapter 18.5 bars indigenous vegetation clearance within 15 m of streams over 3 m wide, and keeps machinery 10 m back on slopes under 20° and 20 m back on steeper land (TRMP 18.5). Kānuka and mānuka count as indigenous.

How much does land clearing cost per hectare in NZ?

There is no honest flat rate. Price depends on access, vegetation density and stem size, slope, ground conditions and what happens to the arisings; one published guide declines to quote per hectare for that reason (GRazer). Send photos and a rough area for a ballpark, and we walk the block for a fixed price.

Will mulching kill gorse for good?

No. Mulching cuts gorse to ground level, but gorse seed stays viable in the soil for decades, so regrowth follows unless you spray or graze it (GRazer gorse removal). Treat clearing as the first step in a two-to-three-year programme, and talk to us about follow-up spraying or grazing.

Can I burn what I clear in Nelson or Marlborough?

Only when the fire season allows. Nelson and Marlborough fire zones can move to restricted or prohibited status in dry periods, and parts of Marlborough are often prohibited outright (FENZ). Check checkitsalright.nz before lighting anything, or mulch on site and skip the burn.

How long does it take to clear a block?

It depends on stem size, slope and what happens to the arisings. Mulching standing gorse is fastest because nothing is windrowed or burnt afterwards; ex-forestry cutover with stumps takes longest. Small jobs are usually fitted in around larger ones. Summer is the busy season for clearing, so book early.

How do I turn ex-forestry land back into pasture?

Clear the slash and stumps, then reshape and sow. We windrow or mulch slash, root-rake stumps, fill holes, cut tracks and shape the block so it can be sprayed, fertilised and grazed, keeping to TRMP 18.5 stream setbacks (TRMP 18.5). Any harvesting is done by subcontracted crews we manage, then our earthworks team carries out the conversion.

What clients say

Request a quote

Send us the address and a rough area, and we will walk the block with you.

Call Mitch: 021 502 429

Email: info@aspecthub.co.nz

Aspect Contracting and Forestry, 65 Whitby Road, Wakefield

This site is protected by reCAPTCHA and the Google
Privacy Policy and Terms of Service apply.

Message Sent