GPS machine-controlled earthworks in Nelson, Tasman and Marlborough
Your engineer's 3D design, loaded into the cab and built to the screen.
GPS earthworks contractor for Nelson, Tasman and Marlborough
Aspect Contracting and Forestry runs GPS machine control on our earthmoving equipment across Nelson, Tasman and Marlborough. We load your engineer's 3D design into the cab and build to it, so platforms, roads and batters are formed to the design with fewer survey call-backs, less rework and less wasted material.
GPS earthworks we take on
Aspect builds to a design for:
Subdivision platforms, roads and stormwater basins for developers.
Engineered models that civil and geotechnical engineers want built as drawn.
House platforms and driveways at the right level for builders.
Dams, fire ponds, tracks and skid sites shaped to a set grade for farmers and forest owners.
Flood-recovery channels and rock structures shaped to a designed profile.
Related services: Subdivision earthworks · Land development and bulk earthworks · Retaining walls
From design model to finished surface
1
Send us the design
Your engineer or surveyor sends the 3D surface and alignment files.
2
Check the model
We check the design against the existing ground, flag clashes or volume surprises and agree tolerances.
3
Set up positioning
The machines are set up for the site so they work to the design coordinates.
4
Cut and fill to the screen
The operator sees live cut and fill against the design in the cab, with avoidance zones around services.
5
Check and hand over
Finished levels are checked against the design, and we agree with your engineer or surveyor how the as-built is recorded.
Rules that still apply
GPS is a construction method; it does not change the consent. Earthworks rules on volume, area, slope and setbacks under the Tasman Resource Management Plan and the Nelson Plan still decide whether you need consent.
Engineered fill: Where a building platform relies on certified fill, NZS 4431:2022 requires the fill to meet the project specification, drawings and QA testing (Standards NZ via Codehub).
Batters: The Nelson Tasman Land Development Manual says no cut or fill batter may be steeper than 1V:1.5H (67 per cent) without the Engineering Manager's approval (NTLDM 2022).
Erosion control: In Nelson City an Erosion and Sedimentation Control Plan is needed once disturbed land exceeds 0.3 ha (NCC LDM Section 9).
Rules and thresholds change; we confirm the current position with your council before we quote.
Ruby Bay Views, Tasman: GPS earthworks for a 14-lot subdivision
Aspect carried out the bulk earthworks for Ruby Bay Views, a 14-lot residential subdivision in Tasman. Our GPS-equipped machines worked to the engineer's design throughout, moving around 40,000 m³ of cut-to-fill and topsoil over an earthworks programme of about five months. These figures describe that project, not a capacity limit or a standard timeframe.
14
Lots
~40,000 m³
Cut-to-fill and topsoil
~5 months
Programme
GPS
Machine control
High-precision, throughout.
GPS earthworks FAQs
Common questions from developers, engineers and builders. Still unsure? Call Mitch on 021 502 429.
What is GPS machine control in earthworks?
It is a positioning system on the machine that shows the operator the 3D design and live cut or fill on a screen in the cab, with avoidance zones and data shared between office and field (Trimble Earthworks). GNSS receivers, an electronic controller and a display work together (machine control comparison).
How accurate is GPS machine control on an excavator?
Systems are built for centimetre-level positioning. Manufacturers quote RTK accuracy in the order of ±10 mm for some excavator systems (Express Tools), and Trimble's benchmark study worked to a ±3 cm tolerance (Trimble productivity study). Accuracy on your job depends on the set-up and the design, so we agree tolerances with your engineer.
Does machine control save money on earthworks?
It can, mainly through time and material. In Trimble's 16-operator study, digging a trench to ±3 cm, guidance gave a 43 per cent average time improvement (Trimble). Industry analysis reports 10–20 per cent less material waste (comparison guide). Results vary by site and design.
How much does GPS earthworks cost compared to conventional?
Often less overall, because machine hours, survey call-outs and imported fill can drop. Price depends on volume, ground conditions, haul distance and design complexity, from a single house pad to a full subdivision stage. A site plan or photos get you a ballpark; the engineer's 3D design and a site visit give a fixed quote.
Do I still need a surveyor if the digger has GPS?
Yes. Machine control builds a model; it does not create one. A surveyor or engineer supplies the design as coordinates, sets control on site and certifies the result (Banks Contractors). What changes is how often they need to come back, because day-to-day set-out and level checks happen in the cab.
How long does a GPS building platform or subdivision cut take?
Usually less time than conventional work of the same size: no waiting for pegs and fewer passes to trim. The bigger the cut, the bigger the saving (Express Tools). For scale, our 14-lot Ruby Bay Views subdivision, about 40,000 m³ of cut-to-fill and topsoil, was programmed at about five months; a single house platform is far shorter.
Do you need consent for GPS earthworks in Richmond or Motueka?
Consent depends on the earthworks, not the method. Volume, area, slope and setbacks under the TRMP decide it in Tasman, and in Nelson City disturbed land over 0.3 ha triggers an erosion control plan (NCC LDM Section 9). Where consent is granted, building to the design helps show the work matched the approved drawings.
What clients say
Request a quote
Send us the drawings or 3D model and the site address, and we will price it from the design. We work across Nelson, Richmond and Marlborough, plus Tasman, Golden Bay/Tākaka, St Arnaud, Murchison, Blenheim, Picton and the Sounds.
Call Mitch: 021 502 429
Email: info@aspecthub.co.nz
Aspect Contracting and Forestry, 65 Whitby Road, Wakefield








